The T-Post Camera Mount allows simple, secure camera mounting and positioning for the best field of view. The collar and mounting wedge is made of galvanized aluminum while the camera bracket, ball head, set screw and thumb screw are made of solid metal construction. The ball joint allows 360 degrees of rotation and 90 degrees of tilt.
- Fits both M.I.N.E.™ and I.C.E.™ Camera models
- Durable lightweight construction
- Integrated ball joint mount for flexible camera positioning
- 1/4 x 20 threaded thumb screw for solid T-Post mounting
CAUTION: Never mount the M.I.N.E.™ Cam on the same T-Post securing a trap panel or severe damage may result.
Always mount the M.I.N.E.™ Cam on a separate 8 foot long T-Post at least 10 inches outside the trap enclosure.
Step 1: Locate the 1/4 x 20 internal threads of camera mounting port located on the bottom of the camera.
Step 2: Align the 1/4 x 20 threads of the T-post mounting bracket to the camera mounting port.
Step 3: Thread bracket no more than three complete rotations or it may damage the camera housing. Tighten securely using the adjusting nut.
Step 4: Lower the square collar at a diagonal over the post spine and studs.
Step 5: Lower the collar into position between any two studs.
Step 6: Insert the mounting wedge between the post spine and square collar.
Step 7: Tighten the mounting wedge thumb screw against the post spine to secure the camera mount.
Step 8: Align the camera by loosening the ball head set screw and centering the view on the ground beneath the feeder legs. Tighten the ball head set screw to secure the camera.
Step 9: Use the M.I.N.E.™ Camera to capture an entire sounder.